|
|
|
Browsing > By Session
Thermal-mechanical-chemical coupled model and three-dimensional damage evaluation based on computed tomography for high-energy laser-ablated CFRP sciencesconf.org:esmc2025:592378 |
Experimental characterization and numerical simulations of fracture of interfaces in mode I and II for printed circuit boards application sciencesconf.org:esmc2025:592428 |
Post-fire fracture behavior of hybrid PEEK thermoplastic composite laminates under one-sided kerosene flame aggression: Experimental and numerical analysis sciencesconf.org:esmc2025:592747 |
Characterizing Adhesion and Failure in Overmolded T-Joint Composites with Novel Isostatic Fixtures sciencesconf.org:esmc2025:592825 |
Steady State Thermal Non-linear Stability Analysis of Bi-directional Nanotube based Functional Graded Composite Plate sciencesconf.org:esmc2025:592833 |
Comparative study on the residual flexural behavior of woven-ply reinforced thermoplastic or thermosetting laminates exposed to a hydrogen/oxygen flame sciencesconf.org:esmc2025:593001 |
Failure Analysis of a Thick Composite Tidal Turbine Blade sciencesconf.org:esmc2025:593304 |
Discrete Element Method (DEM): A numerical technique to insight on the role of microcracks on the sustainability of refractory materials sciencesconf.org:esmc2025:593713 |
Development of a technological test for an aircraft braking application: Study of a carbon/carbon composite and metal structure assembly sciencesconf.org:esmc2025:593748 |
Analysis of the compression process of an angle made of flax fibers in a PLA resin matrix sciencesconf.org:esmc2025:596723 |
Gradient damage model for simulating thermo-mechanical coupling: application to composite material degradation sciencesconf.org:esmc2025:596744 |
Evaluation of the strain gradient effect on compressive failure of CRFP composites sciencesconf.org:esmc2025:592521 |
WIRE-MATRIX DEBONDING UNDER TRANSVERSE LOAD: Inverse identification of a cohesive zone model for the interface sciencesconf.org:esmc2025:597162 |
Novel Methodology for Monitoring Skin-Stringer Delamination Growth In Thermoplastic Composite Panels sciencesconf.org:esmc2025:597223 |
Optimization of impact properties and weaving patterns of woven composites sciencesconf.org:esmc2025:597384 |
Closed-form estimates of the homogenized elastic properties for bio-inspired staggered composites sciencesconf.org:esmc2025:597367 |
Effect of the viscoelastic behavior of the composite substrates on the thermomechanical modeling of a printed circuit board sciencesconf.org:esmc2025:597577 |
Behavior and damage study of Oxide/Oxide CMCs using in-situ Micro-CT test and Digital Volume Correlation sciencesconf.org:esmc2025:597845 |
Design and analysis of helical vertical axis offshore wind turbine sciencesconf.org:esmc2025:597903 |
Linear viscoelasticity of anisotropic carbon fibers reinforced thermoplastics: from micromechanics to dynamic torsion experiments sciencesconf.org:esmc2025:598004 |
Identification method of the resin shrinkage: Application to woven composite used in Power Electronics sciencesconf.org:esmc2025:591914 |
Thermal Barrier Coating for Carbon Fiber-Reinforced Plastic Composites sciencesconf.org:esmc2025:602709 |
Energy Efficient Morphogenic Manufacturing of Composite Materials in Space and on Earth sciencesconf.org:esmc2025:602897 |
Influence of the fiber length distribution on the modeling procedure of short fiber-reinforced composites by cross-correlated non-Gaussian random fields sciencesconf.org:esmc2025:603209 |
A mesoscopic constitutive model for simulating rate-dependent plasticity and creep in unidirectional polymer composites sciencesconf.org:esmc2025:603317 |
An Experimental Investigation on Flexural and Interlaminar Shear Behavior of Glass Fiber Reinforced Polymer Composites under Extreme Environments sciencesconf.org:esmc2025:603411 |
Carbon Fiber-Reinforced Polymer Composites: Enhanced Properties through Nanoparticle and Thin Film Integration sciencesconf.org:esmc2025:597917 |
A compact model for the micro- to macro-scopic deformation behavior of natural short-fibre reinforced semi-crystalline polymer composites sciencesconf.org:esmc2025:590856 |
Scale and stacking e ects of laminated composite plates with geometric singularities : A critical numerical/experimental comparison sciencesconf.org:esmc2025:602115 |
Mechanical properties of titanium matrix composites produced by Electro-Sinter Forging sciencesconf.org:esmc2025:592781 |
Design of bio-inspired glass-sponge lightweight cellular structures and manufacture via 3D printing continuous flax fiber biobased composite for energy absorption application sciencesconf.org:esmc2025:593009 |
Experimental characterization and modeling of concrete behavior under highly confined compression loading sciencesconf.org:esmc2025:597115 |
From Microstructure to Mechanical Integrity: SiC/Al IPCs for Demanding Industrial Applications sciencesconf.org:esmc2025:590982 |
2D+ multi-scale method for industrial design of multi-layered bending plates sciencesconf.org:esmc2025:593029 |
Accelerating innovations in building envelope materials using orchestrated multiscale material modelling workflows sciencesconf.org:esmc2025:583052 |
Microstructure-sensitive modelling of solid explosives under mechanical impulse sciencesconf.org:esmc2025:596426 |
On the computational methods for the analysis of transversely flexible sandwich beams sciencesconf.org:esmc2025:592841 |
Numerical analysis of regularly arranged brick structures inspiring nacre tissue sciencesconf.org:esmc2025:590888 |
Experimental study using interfacial inserts to create bridging to improve delamination response in composites sciencesconf.org:esmc2025:593044 |
A study on the defects in the lay-up process of prepreg-based carbon fiber composites sciencesconf.org:esmc2025:593149 |
Composite materials and structures reinforced with bamboo fibers: A comparative study on the influence of species and age on the fiber physical and mechanical properties sciencesconf.org:esmc2025:593744 |
